Orlanski ORLIGNO 100 Manual And Service Manual page 34

Shows current room temperature in room no.1 (large type)
and set value (small type). After pressing "Enter", set desired
room temperature
Circuit heating program no. 1:
a. time program – according to programmed time- intervals
b. permanent – no matter of time-intervals comfort
temperature is kept
c. off – heating is turned off
Burner work: ON/OFF. When burner is OFF, controller
controls heating system, but doesn't start the burner.
Manual start of feeder from pellet tank. Function useful
after fuel runs out. After fi lling the tank with fuel activate
FEED THE FUEL function, till the moment when fuel will
be on the burner.
34