Download Print this page

Concept2 RO 3011 Manual page 16

Oil heat radiator

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 14
UK
Check of supporting footings
Before use check the supporting footings/wheels.
Turn the radiator upside down. The noise of overflowing during this handling is normal.
The wheeled supports are packaged separately (in amount 1 to 4). Carefully tighten the
use screws with pliers.
Check the supports for being fixed sufficiently.
Turn the radiator back into its original position and wait at least for 3 minutes till the
appliance settles down.
Oil radiator operation
Power output setting
Set to the grade I or II into the position "ON" low output.
Change over the both positions into the position "ON" high output.
Setting antifreeze protection
o
To prevent the temperature drop below the value approx. 5 C (if not present for a long
time), you can adjust the temperature controller button to
.
Room temperature controller
The temperature can be currently changed by turning the temperature controller button.
Set the temperature controller button to the max. position. As soon as the required room
temperature is achieved, turn with the button to the left till the radiator turns off. Then the
appliance maintains the set up temperature. Setting to the minimum temperature turn with
the button to the left to the antifreeze grade.
Prevention against overheating
The appliance is provided with the thermal excess temperature protection that turns the
appliance automatically off when some technical malfunction occurs, or if it is used
improperly.
Instructions
Always observe safe distance (not less than 50 cm) between the heater and the wall, or
other objects.
Servicing
The device does not require any special servicing. Clean it only with a dry, or slightly wet
piece of cloth.
Electrical parts must never come into the contact with water.
Packaging:
Cardboard box – sorted paper waste disposal.
PE bag – sorted PE waste disposal.
Polystyrene pads – sorted PS waste disposal.
Product:
Plastic materials – sorted disposal of plastic materials.
Cable without the plug – sorted copper waste disposal.
Metallic parts, electronics – iron scrap.
Oil – oil disposal.
RO 3011, 3009, 3007
15

Advertisement

loading

This manual is also suitable for:

Ro 3009Ro 3007