Concept2 RO 3011 Manual page 15

UK
The appliance must be placed on such place preventing risk of fire due to contact or
proximity of combustible objects. The appliance must not be accessible to persons that
are bathing or showering.
The appliance must not stand just under the wall socket (or under the wall recess).
The appliance must not be covered with a curtain and with similar cloth as there is the
risk of overheating.
When repairing or handling the appliance turn it off, disconnect it from the mains and
wait for cooling down.
Never use the appliance outdoor and use it in dry rooms only.
Clean the appliance only with dry or slightly damp cloth. The electrical parts, as
controlling devices, plug, heating body, etc. must not come into the contact with water.
Do not use the appliance in rooms where petrol, paints, or flammable liquids are used
or stored.
The product is not intended for professional application.
Never use any accessories that are not recommended by the manufacturer. Using such
accessories can be hazardous for the user and is applied, there is a risk of damaging
the appliance.
Maintenance works requiring inference into the product electrical installation may be
made only in an authorized electric repair shop.
Operation instructions
Please don't dispose packaging and the discarded appliance, but inquire about the
proper procedure in line with the respective local regulations on environment.
Dispose the sorted packaging into the respective containers for recycling.
The discarded appliance must be immediately disabled and disposed to the respective
waste yard.
Turning on
Place the appliance so that:
- The supply cable is unreeled.
- The plug is inserted into the socket.
To turn on the appliance is on the room temperature controller must be on - turn with the
temperature controller button.
Before using oil radiator
Remove the radiator carefully and discreetly from the protection packaging. Check whether
some damage occurred during handling or transporting. Stop handling if the appliance is
damaged.
When turning the appliance of for the first time, turn the button to the maximum output and
leave it on for at least two hours. During the time ensure sufficient ventilation of the room
as some vapours are evaporated.
During this initial operation the appliance sometimes is slightly boozing.
14 RO 3011, 3009, 3007