Download Print this page

Before Use - Concept2 RO 3011 Manual

Oil heat radiator

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 14
Specification
Voltage
Power input

BEFORE USE

Peruse carefully the following instructions. They include important information on
handling, safety and servicing the appliance.
Keep in safe for latter use, or for the next potential customer.
This equipment corresponds with the technical directives for testing and current
safety regulations for appliances.
This equipment corresponds with E.E.C. Guidelines 89-336 regarding
electromagnetic compatibility and 73/23 EWG "Low Voltage Guidelines". On the
account this appliance has attached the type plate with CE registration.
General instructions
Never turn the appliance on if there is some visible damage (cracklings, or is
punctured), if the supply cable is faulty, or another defect is expected (e.g. after
a drop).
Turn on the appliance only if the voltage specified in the type plate corresponds with
the voltage in mains.
The appliance must not be fixed to the wall, nor used in transporting means.
Surface of the appliance radiates that can exceed 60 C.
We disclaim any liability for using the appliance for anything else than heating, if it is
used another way than described in the Manual, of if it is not repaired workmanlike.
Don't use this appliance with any programmer, time switch, or with any other
equipment automatically turning the appliance on. If the appliance is covered, or
improperly placed, there is a risk of fire occurrence.
This appliance is filled with a certain amount of special oil. Only the manufacturer or
his authorized service centre may do the repairs requiring opening the oil
compartment. The user must contact them also if any oil leakage is detected.
When disposing the regulations regarding the oil disposal must be observed.
Safety instructions
Never use the appliance when children are round and about.
The supply cable must not be pulled over sharp edges, or be tangled.
Never draw out the plug from the socket pulling by the supply cable.
Don't use the damaged extension cord.
The supply cable must not lay on the appliance when in use.
Stand the appliance only in vertical position.
Be careful and don't use the appliance near the batch, shower of washbasin.
Never drop the appliance in water, or poor out any liquid on it.
RO 3011, 3009, 3007
RO 3011
230 V – 50Hz
2500 W
(1000-1500-2500)
RO 3009
230 V – 50Hz
2000 W
(750-1250-2000)
o
UK
RO 3007
230 V – 50Hz
1500 W
(500-1000-1500)
13

Advertisement

loading

This manual is also suitable for:

Ro 3009Ro 3007