Mitsubishi MELSEC-A A2USHCPU-S1 User Manual page 59

4. CPU MODULE
Item
Comment
Expanded comment
Switch output mode from STOP to RUN
Self-diagnosis function
Operating mode when there is an error
RUN time start-up method
Latch (power failure compensation) range
Remote RUN/PAUSE contacts
Print title regisration
Keyword registration
I/O assignment
Step operation
Interrupt processing
Data link
Clock function
Allowable momentary power failure period
5VDC internal current consumption
Weight
External dimensions
Performance specifications (Continued)
A2ASCPU
Max. 4032 points (Set with the unit of 64 points)
Max. 3968 points (Set with the unit of 64 points)
Select either re-output the operation status before stopping (default) or output
Watchdog error supervision (watchdog timer fixed to 200ms)
Error detection in the memory, CPU, I/O, battery, etc.
(upon power supply on/power restoration after power failure, automatic restart by
turning the
(Possible to set latch ranges for L, B, T, C, D, W)
Possible to set one contact point for each of RUN/PAUSE from X0 to X1FFF.
Possible to register number of occupied I/O points and module model names.
Possible to execute or stop sequence program operations.
Possible to operate an interrupt program by the interrupt module or constant
Year, month, day, hour, minute, second, day of the week
Accuracy
130mm (5.12inch)
CAUTION
When the conventional system software packages and peripheral devices are
used, the usable device range are limited.
Details are provided in Section 2.2.3.
Model
A2ASCPU-S1
after exectution of operation.
Select STOP or continue
Initial start
" "
RUN switch of the CPU or ON.)
L1000 to L2047 (default)
YES (128 characters)
YES
period interruput signal.
MELSECNET/10, MELSECNET(II)/B
(automatic detection of the leap year)
-3.2 to +5.1s(TYP.+1.6s)/d at 0
-1.2 to +5.3s(TYP.+2.2s)/d at 25
-8.2 to +3.5s(TYP.+1.6s)/d at 55
By power supply module
0.32A
0.41kg
54.5mm (2.15inch) 93.6mm (3.69inch)
4 - 6
Remark
A2ASCPU-S30
Set in parameters.
Set in parameters.
Refer to Section 4.1.4
for details.
Set in parameters.
(refer to Section 4.2.1)
Range set by
parameters.
Set in parameters.
Set in parameters.
Set in parameters.
Refer to Section 4.3
Refer to Section 5.1