Mitsubishi MELSEC-A A2USHCPU-S1 User Manual page 31

2. SYSTEM CONFIGURATION
(2)
REMARK
Utility package
None of the following utility packages for A6GPP/A6PHP can be used:
SW -AD57P
SW -UTLP-FN0
SW -UTLP-FN1
SW -UTLP-PID
SW -SIMA
SW -UTLP-FD1
SW -SAPA
The characters generators and canvas, which are necessary for AD57(S1), are
created on the peripheral device using the SW -AD57P.
POINT
(1) Utility packages which access the A2USHCPU-S1 or A2ASCPU-S30 can
specify only in the device range for A3ACPU or A3HCPU equivalent.
(Refer to Section 2.2.3)
Packages which access the A2USCPU(S1), A2ASCPU or A2ASCPU-S1 can
specify only in the device range for A2ACPU or A3HCPU equivalent.
(Refer to Section 2.2.3)
(2) Use an AnU-compatible utility package to use the device range for the
A2USHCPU-S1, A2USCPU(S1) or A2ASCPU(S1/S30).
(Example: SW1IVD-SAP2, etc.)
The packages marked with * can execute the same
*
functions using the dedicated instructions.
For details, refer to type AnSHCPU/AnACPU/
AnUCPU/QCPU-A (A Mode) Programming Manual
(Dedicated Instructions).
2 - 9