Table of Contents
Advertisement
Configuration
5.2
Easy Config Modes
In the web interface, you can perform the initial configuration using Easy Config
Modes:
Fig. 5
EC
Role
1
Bluetooth PANU
2
–
3
–
4
Client
5
WLAN AP
6
Bluetooth NAP
(any)
11
The Easy Config Modes are also described when selected in the web interface.
®
Anybus
Wireless Bolt CAN
Example, Easy Config Mode 5
Description
Configure as Bluetooth client and scan for another client
(PANU to PANU). Recommended setting for Bluetooth
point-to-point communication.
Listens for 40 seconds or until a configuration is
established.
Reset configuration to factory defaults.
Reset IP settings to factory defaults.
Wait for automatic configuration.
Listens for 120 seconds or until receiving a configuration.
Configure units in mode 4 as clients.
Restart as access point and connect clients.
Mode 5 and 6 will time out after 120 seconds.
Activate ConfigLock mode.
™
Startup Guide
13 (24)
SP2937 1.0 en-US
Advertisement
Table of Contents
Need help?
Do you have a question about the Anybus Wireless Bolt CAN SP2937 and is the answer not in the manual?