Carrier XCT 7 40VCC727FQEE Operation & Installation Manual page 28

3.3 Control function of air conditioning
3.3.1 Air conditioning control interface
Click to enter the control interface, Parameters can be set on the control interface. After setting, Click send
to complete setting.
① Air quality parameter display. When air conditioner or HRV installs air guard and other air sensing
equipment, it can display "environmental humidity/formaldehyde concentration/PM2.5 /CO2/TVOC" and
other parameters at the current position
② Ambient temperature, display the current ambient temperature
③ Setting temperature, display the current setting temperature, adjust the setting temperature through
"-"/" + ".
④ On/off button, click the switch device switch machine state
⑤ Air conditioning mode , display the current mode, and switch air conditioning mode by clicking
⑥ Wind speed setting, display the current wind speed, and click to set the wind speed
⑦ Centralized control mode, you can switch to the current centralized control mode by clicking. You can
set the " Perform the final Settings first/centralized/locked"
Perform the final Settings first: The centralized controller/line controller/remote controller can control all
functions of the corresponding indoor units. Perform the final Settings first
Centralization: When set to centralized control mode, the wire controller/remote controller can only
control the on/off of the indoor units, and other functions are invalid
Lock: When set to lock, the wire controller/remote controller cannot control the air conditioner and
displays the lock sign
⑨
27
⑩
⑥
③
②
⑧
⑦
⑤
④
①