Carrier XCT 7 40VCC727FQEE Operation & Installation Manual page 71

⑧ ON/OFF button. Enabled means that the current timed action takes effect and the control instruction is
issued when the trigger condition of the timed action is satisfied.Deactivation means that no timing
condition is issued regardless of whether the trigger condition is met
3.16 Interlock set
Interlock setting is used to set the automatic switching function of the full heat exchanger and the new fan
equipment
3.16.1 Linkage function view
The interface for interlocking Settings is as follows
②
① ③ ④
⑤
① Linkage classification, click to switch to view the linkage device type
② Linkage device classification name, display the current linkage device type
③ Full on and off button, click to switch the device linkage function in the current interface full on and full
off
④ Edit button, click to enter the edit state.After entering the editing state, click the device tile to edit.
70