Alarm Setting - Carrier XCT 7 40VCC727FQEE Operation & Installation Manual

3.11 Alarm setting

The alarm setting function is used to set the trigger setting of parameter warning and alarm prompt setting
3.11.1 Alarm trigger setting
Alarm setting function supports threshold alarm and alarm fault prompt setting of each parameter item
①
① To set the alarm function, we can click "Alarm Trigger Settings"/" Alarm Prompt Settings"
② Display the current selected function
③ By setting details, we can heck the parameters of the current threshold alarm, two groups of conditions
can be displayed
④ By click the enable/stop button, we can switch the current parameter item alarm to enable, click to stop,
the current parameter does not take effect. Disable all by default..
⑤ Click to edit the threshold range of the current parameter setting, and then click to edit
②
③
51
④ ⑤