Carrier XCT 7 40VCC727FQEE Operation & Installation Manual page 33

3.5 Third-party device monitoring
Third-party equipment monitoring is used to monitor third-party equipment compatible with the centralized
controller, such as lighting, new fans, etc
① searching bar. Used to search 3
which is convenient to manage.
② Group list.it will display the current group, and you can change the group for control
③ Device section button. You can sect the pop down bar to set the "ALL/LIGHT/FAN" setting and its
easy for control all or part of the device
④ All on/all off function, you can control the current device as the all ON OFF setting
⑤ Light icon, it display the light status and you can change the ON/OFF setting through this icon and
you needn't to set twice once you have send the order
rd
⑥ display the 3 party device operation status and you can change the ON/OFF setting through this icon
and you needn't to set twice once you have send the order
①
②
⑤
⑥
rd
party device zone, you can enter key word to search the device
32
③ ④