Carrier XCT 7 40VCC727FQEE Operation & Installation Manual page 26

③ When a machine has set the timer mode, click on the blue circle to enter the Settings mode, You can view
the detailed Settings, as shown in the picture below
④ The timing task of the current partition can be quickly switched through the switch button, click one to
switch the state. When set to " " the timer action is not performed in the current partition, but the
current button is not impressed by the" effective/invalid "of the timer task.
⑤ When the number of faults is not 0, click the red circle to quickly check the fault details of the current
partition, as shown in the figure below
25