Carrier XCT 7 40VCC727FQEE Operation & Installation Manual page 41

Click "COM1/COM2" to update the bus, and all the indoor units under the current line will be automatically
grouped and named according to different gateways.
② ③
①
④
① Click the filter button to select "All/edited/unedited" to improve commissioning efficiency
② Add/delete button, click "-" to delete, and the interface pops out as shown in the figure below. Click the
corresponding indoor unit to select. After selecting the device, click "Complete" to delete the selected device,
if select cancel, will exit delete mode
Click "+" to manually add the indoor units, as shown in the popover below. When manually adding, all
parameter items are allowed to be modified.Click "OK" to add the device manually
The following information needs to be added for new devices
40