Boot; Exit - DFI BW551 User Manual

Boot

This section configures boot options.
InsydeH20 Setup Utility
Main Advanced Security Boot
OS Selection <Windows>
Numlock <On>
Boot Type <Legacy Boot Type>
PXE Boot to LAN <Disabled>
USB Boot <Enabled>
F1 Help ↑/↓ Select Item F5/F6
Esc

Exit

←/→ Select Item Enter
OS Selection
Select the system's operating system from Windows, Linux or DOS
Numlock
Select the power-on state for numlock
Boot Type
Select the boot type. The options are Dual Boot Type, Legacy Boot Type or UEFI Boot
Type.
PXE Boot Capability
Disables or enables PXE boot to LAN.
USB Boot
Enable or disable the booting to USB boot devices.
Chapter 3 BIOS Setup
Rev. 5.0
Exit
Selects Power-on state for
Numlock
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

.
.
Chapter 3
Exit
This section configures the parameters for exiting the BIOS menu.
Main Advanced
Exit Saving Changes
Load Optimal Defaults
Discard Changes
F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
Exit Saving Changes
Select this field and then press <Enter> to exit the system setup and save your
changes.
Load Optimal Defaults
Select this field and then press <Enter> to load optimal defaults.
Discard Changes
Select this field and then press <Enter>to exit the system setup without saving your
changes.
34
InsydeH20 Setup Utility
Security Boot Exit
Exit system setup and save
your changes.
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

Rev. 5.0
www.dfi.com