Security - DFI BW551 User Manual

Embedded sbc 3.5”
Table of Contents

Advertisement

Smart Fan Function
This section configures the Smart Fan Function.
InsydeH20 Setup Utility
Advanced
Smart Fan Function
SYS Smart Fan Control
<Enable>
Boundary 1
[40]
Boundary 2
[50]
Boundary 3
[60]
Boundary 4
[70]
Fan Speed Count 1
[10]
Fan Speed Count 2
[15]
Fan Speed Count 3
[25]
Fan Speed Count 4
[255]
F1
Help
↑/↓
Select Item
F5/F6
Esc
Exit
←/→
Select Item
Enter
SYS Smart Fan Control
Enable or disable the smart fan.
Boundary 1 to Boundary 4
Set the boundary temperatures that determine the operation of the fan with different
fan speeds accordingly. For example, when the system or the CPU temperature reaches
boundary temperature 1, the system or CPU fan should be turned on and operate at
the designated speed.
The range of the temperature is from 0 to 127
Fan Speed Count 1 to Fan Speed Count 4
Set the fan speed. The range is from 0 (fan stop)-100% (full speed).
Chapter 3 BIOS Setup
Chapter 3
Rev. 5.0
Enable/Disable Smart Fan
Change Values
F9
Setup Defaults
Select
SubMenu
F10
Save and Exit
o
C.

Security

This section configures the trusted platform module (TPM) function.
Main
Advanced
Security
Current TPM Device
TPM State
TPM Availability
TPM Operation
Clear TPM
Supervisor Password
Set Supervisor Password
F1
Help
↑/↓
Select Item
Esc
Exit
←/→
Select Item
TPM Availability
Show or hide the TPM availability and its configurations.
TPM Operation
Enable or disable the TPM function. It displays the following options:
No Operation: No changes to current state.
Disable: Disable and deactivate TPM.
Enable: Enable and activate TPM.
Clear TPM
Remove all TPM ownership contents.
Set Supervisor Password
Set the administrative password and the length of the password must be greater than
one character.
33
InsydeH20 Setup Utility
Rev. 5.0
Boot
Exit
Install or Change the pass-
word and the length of
<TPM 2.0 (FTPM) >
password must be greater
Enabled, UnOwned
that one character.
<Available>
<No Operation>
[]
Not installed
F5/F6
Change Values
F9
Setup Defaults
Enter
Select
SubMenu
F10
Save and Exit
www.dfi.com

Advertisement

Table of Contents
loading

Table of Contents