DFI BW551 User Manual page 27

Video Configuration
This section configures the video settings.
InsydeH20 Setup Utility
Advanced
Video Configuration
Primary Display <Auto>
Integrated Graphics Device <Enabled>
Boot display <CRT+LCD>
LCD Panel Type <1024x768>
LCD Panel Color Depth <24 Bit>
Dimming Control <PWM Mode>
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→ Select Item Enter
Primary Dispay
Select either IGD or PCIe Graphics device to be the primary display.
Integrated Graphics Device
Enable or disable the IGD function.
Chapter 3 BIOS Setup
Chapter 3
Rev. 5.0
Select which of IGD/PCI
Graphics device should be
Primary Display
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Boot display
Set the display device combination during system booting. The options vary depend-
ing on the "Boot Type" selected in the "Boot" menu.
Advanced
Video Configuration
Primary Display
Integrated Graphics Device
Boot display
LCD Panel Type
LCD Panel Color Depth
Dimming Control
Boot display
LCD+CRT
LCD+DP
DP+LCD
DP+CRT
CRT+LCD
CRT+DP
F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
LCD Panel Type
Select the type of LCD panel connected to the system's LCD connector. Please check
the specifications of your LCD monitor.
Advanced
Video Configuration
Primary Display
Integrated Graphics Device
Boot display
LCD Panel Type
LCD Panel Color Depth
Dimming Control
LCD Panel Type
800x480
800x600
1024x768
1366x768
1280x1024
1920x1080
F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
27
InsydeH20 Setup Utility Rev. 5.0
Boot Display
<Auto>
<Enabled>
<CRT+LCD>
<1024x768>
<24 Bit>
<PWM Mode>
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

InsydeH20 Setup Utility Rev. 5.0
Select LCD Panle Type
<Auto>
<Enabled>
<CRT+LCD>
<1024x768>
<24 Bit>
<PWM Mode>
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

www.dfi.com