Supported Cables
Warning: Only the following APPROVED cables must be
used with the Altos S700 Series enclosures.
This section lists the cables that must be used with the Altos S700 Series
enclosure. Failure to adhere to these guidelines may cause the
enclosure to operate incorrectly.
Copper Cables
Only the following AMPHENOL copper Fibre Channel cables must be
used with the Altos S700 Series enclosure (copper applications).
Amphenol Cable Model Numbers:
Model No.
CA.S7002.001
CA.S7002.002
CA.S7002.003
CA.S7002.004
Description
.3m 2Gb Fibre Channel, copper cable, non-equalized,
HSSDC-HSSDC
1m 2Gb Fibre Channel, copper cable, non-equalized,
HSSDC-HSSDC
3m 2Gb Fibre Channel, copper cable, non-equalized,
HSSDC-HSSDC
6m 2Gb Fibre Channel, copper cable, non-equalized,
HSSDC-HSSDC
25