Table of Contents
Advertisement
15
Unpacking and Initial Setup
When you receive your system, visually inspect the exterior of the
packaging for any signs of damage. If any damage is found the carrier
and Acer should be informed immediately, and they will advise you of
the appropriate action. The cartons are sealed using packaging tape
which should be cut open in the normal manner. Exercise caution when
lifting out the components. At this point the contents should be
verified against the packing list and Acer should again be notified if
any discrepancies exist. Anti-static precautions must be observed
before removing any of the components.
Advertisement
Table of Contents
