Table of Contents
Advertisement
RAID Controller LEDs
The RAID controller has 7 LEDs located and numbered as shown.
Figure 5-5 RAID controller LEDs
FC Host Connectors (SSF optical)
The table below describes the LEDs meaning.
Controller Status LEDs
LED
Description
1
Yellow - Not Ready. Normally Off. Goes On during power up
sequence.
2
Green - Ready. Normally On
3
Green - Dirty Cache. On when there is data in cache.
4
Yellow - BBU Fault. Normally Off.
5
Green - Partner Fail. Normally Off
6
Green - Device Activity i.e. on drive channels. Flashes with
activity.
7
Green - Host Activity. Flashes with activity.
HSSDC Connector
1
RS232
2
3
Status LEDs
4
5
6
7
69
Advertisement
Table of Contents
