Table of Contents
Advertisement
Installing and Removing an Advanced
Cooling Module
The advanced cooling modules are located in the rear of the enclosure.
Follow these procedures to install and remove the advanced cooling
modules.
Installing an Advanced Cooling Module
1
Select the advanced cooling module slot into which the module is
to be installed.
2
Orient the module, such that the LEDs are on the top (on the right
hand side for rack mount systems).
3
Gently slide the ACM into the empty ACM slot.
4
Secure in place using the two fixing screws (torque setting 0.3Nm).
Removing an Advanced Cooling Module
1
Loosen the two fixing screws.
2
Using the advanced cooling module handle, gently slide it out of
the enclosure.
Caution: Immediately replace the ACM to maintain correct
airflow.
Figure 6-4 Advanced Cooling Module
Handle
LEDs
1
2
79
Advertisement
Table of Contents
