Table of Contents
Advertisement
YOUNG M
IV
K
DIGITAL-TO-ANALOG CONVERTER AND PREAMPLIFIER
REVISION PrA – DECEMBER 2020
The YOUNG MKIV configuration menu includes many items. It may be desirable that any
access to the menu starts from the last item displayed in previous access. This is
particularly useful when different settings of a certain item are to be tested.
SET STARTUP ITEM
7.5.22. FIRMWARE REVISION: Accessing Firmware Revision Information
The YOUNG MKIV is a complex device in which different microcontrollers interact for correct
operation. User may, whenever needed, update the firmware of the USB controller of the
YOUNG MKIV. As well, M2Tech might launch a call for general update of the internal
controllers. Therefore it's necessary to access to YOUNG MKIV current firmware release
information to decide whether an update is required or not. This can be accomplished by
accessing the menu as one of the items is that related to firmware revisions.
Of course, user can't change the displayed values by the front panel controls nor the
remote: they only change when a firmware update is performed as described in Chapter
10.
7.5.23. DEFAULT SETTINGS: Restoring Factory Settings
User may need or want to restore the factory settings. This can be achieved by accessing
this menu item. Please note that all previous settings will be lost.
SET STARTUP ITEM
FIRST
FIRMWARE REV.
FW REV
uC: 1.00-HM
DEFAULT
DEFAULF
ARE YOU SURE?
SETUP
SET STARTUP ITEM
LAST
SETUP
USB: 1.00
SETUP
DEFAULT
NO
32
M2Tech
www.m2tech.biz
Copyright © 2017, M2Tech Srl
Advertisement
Table of Contents
Need help?
Do you have a question about the YOUNG MKIV and is the answer not in the manual?
Questions and answers