Bluetooth®: Enabling/Disabling The Bluetooth® Receiver; Bt® Pairing: Enabling Bluetooth® Pairing (Japan Version Only) - M2TECH YOUNG MKIV User Manual

YOUNG M IV
K
DIGITAL-TO-ANALOG CONVERTER AND PREAMPLIFIER
REVISION PrA – DECEMBER 2020
control, as the VAN DER GRAAF M
remote instead.
This way, pushing the on/off key on the remote will instruct the VAN DER GRAAF M
enable/disable its outputs to power the YOUNG MKIV and other attached M2Tech units on/off
in the programmed order. Please read the VAN DER GRAAF M
7.5.19. BLUETOOTH
User may choose to enable or disable the Bluetooth
accessing this menu feature.
BLUETOOTH AUDIO
®
7.5.19B. BT PAIRING: Enabling Bluetooth
User may connect a Bluetooth
achieve this, the YOUNG MKIV must be set in pairing mode, so that hosts looking for an
audio sink can detect it and connect to it.
Once enabled, pairing mode is operative for 3 minutes, then it's automatically disabled.
User can, however, disable pairing before the 3 minutes expire.
NOTE: this option in only available for units sold in Japan.
II will receive and execute the on/off command from the
K
REMOTE POWER
REMOTE POWER
ENABLE
®
: Enabling/Disabling the Bluetooth
BLUETOOTH AUDIO
ENABLE
®
host, such as a smartphone, to the YOUNG MKIV. To
BT PAIRING
BT PAITING
ENABLE
II user manual for details.
K
SETUP
REMOTE POWER
DISABLE
®
interface. This can be done
SETUP
BLUETOOTH AUDIO
DISABLE
®
Pairing (Japan version only)
SETUP
BT PAITING
DISABLE
30
M2Tech
www.m2tech.biz
II to
K
®
Receiver
Copyright © 2017, M2Tech Srl