Headphones Fade: Setting The Auto-Fader For Headphones Connection; Power On Volume: Choosing The Volume Set At Power-On; Auto Off: Setting The Automatic Switch-Off - M2TECH YOUNG MKIV User Manual

YOUNG M IV
K
DIGITAL-TO-ANALOG CONVERTER AND PREAMPLIFIER
REVISION PrA – DECEMBER 2020
7.5.13. HEADPHONES FADE: Setting the Auto-fader for Headphones
Connection
As the listening level for the headphones output is set regardless the level settings for line
level outputs, it might happen that an abrupt level change be heard when plugging and
unplugging the headphones jack. To avoid this, an automatic fader can be enabled.
HEADPHONES FADE

7.5.14. POWER ON VOLUME: Choosing the Volume Set at Power-on

The user can choose which volume the YOUNG MKIV will set at power-on: volume can be
set to minimum (MUTED) or to the last level set before previous power-off.
POWER ON VOLUME

7.5.15. AUTO OFF: Setting the Automatic Switch-off

To comply with UE requirements regarding energy saving, the YOUNG MKIV is able to
automatically switch off after a certain idle time. Idle means a time lapse in which user
didn't access any control, like volume or mute.
User can set the auto switch-off time (between 10 and 240 minutes in 10 minutes steps) or
he/she can disable this feature.
NOTE: To disable this feature, the value "OFF" must be selected, which is one of the
allowed values.
SETUP
HEADPHONES FADE
ENABLE
SETUP
POWER ON VOLUME
MUTED
SETUP
AUTO OFF
AUTO OFF
OFF
28
HEADPHONES FADE
DISABLE
POWER ON VOLUME
LAST
AUTO OFF
50 MIN
M2Tech
www.m2tech.biz
Copyright © 2017, M2Tech Srl