Baseplate / Frame; Lifting The Road Saw; Removing The Lift Bail - Husqvarna FS 5000D Workshop Manual

14.6
1
1
3
5
7
72

BASEPLATE / FRAME

2
2
4
6
8
14.6. BASEPLATE /
FRAME

Lifting the Road Saw

1� Use a travers and attach it to the
hole on top of the lift bail and lift
it up�
2� Put four axle stands beneth the
saw and Lower the saw on top of
the axle stands�

Removing the Lift Bail

For Front Lift Bail, first see
Removing the Front Cover (p.
48) and Removing the Side
Covers (p. 48).
1� [For removing the middle part
lift bail]Remove the four screws
conecting the air cleaner to the
middle lift bail�
2� Cut of all clips�
3� Remove the front bolt�
4� Remove the rear bolt�
5� Lift out the lift bail�
6� [For removing the back lift bail]
Remove the four screws holding
the back lift bail and lift it away�
7� [For removing the front lift bail]
Loosen the two screws on each
side connecting the belt cover to
the gearbox�
8� Remove the belt cover�