Removing The Speed Control - Husqvarna FS 5000D Workshop Manual

5
7
1
3
5
COWLING
6
8
2
4
6
4� Flip the top off�
5� Remove the screw located
underneath�
6� Pull the top off�
7� Remove the nut�
8� Remove the lowering speed valve�
Reverse steps for assembly�

Removing the Speed Control

First see Removing the Battery
(p. 49) and Removing the HMI
Board (p. 55).
1� Remove the clips on the throttle
wire
2� Remove the cable from the ball�
3� Loosen opposite nuts holding the
wire�
4� Remove 4 screws holding the
panel and remove it�
5� Lift the plastic cover away�
6� Remove the six screws and lift up
the bracket�
14.3
57