Electrics /Hydraulics; Removing The Battery; Removing The Wiring Harnesses - Husqvarna FS 5000D Workshop Manual

1
3
1
Rear
3
ELECTRICS / HYDRAULICS
2
4
2
Front
4
14.2. ELECTRICS /
HYDRAULICS

Removing the Battery

First see Removing the Side
Covers (p. 48) (only left side
needed).
1� Loosen bolt at the minus
terminal� Use a safety key�
2� Loosen bolt at the plus terminal�
3� Unscrew the two nuts and remove
the battery holder�
4� Lift the battery out without tilting
it�
Removing the Wiring
Harnesses
First see Removing the Side
Covers (p. 48) and Removing
the Battery (p. 49).
1� The image shows the wiring
harnesses� First part of removing
the wiring harnesses is to remove
all the fir-tree clips.
2� Remove the five clips on the left
side�
3� Remove eight more clips on the
left side�
4� Remove three clips under the
clutch�
14.2
49 49