100 H Service - Husqvarna FS 5000D Workshop Manual

9
1
1

100 h Service

1
22
SERVICE AND MAINTENANCE
2
Front Wheel Bearings
First see Replacing the Wheels (p.
77).
1� Lubricate the Front Wheel
Bearings by using the grease
nipples�
Hydraulic System Filter
1� Replace hydraulic system filter.
Fill the new filter with oil and
lubricate the seal with a few drops
of oil before assembly�
2� Unscrew the window on the
hydraulic pump and check the oil
level� The level should be up to the
window� If not, then remove the
lid and fill with oil to the window.
Front Axle Pivot Bearings
1� Lubricate the front axle pivot
bearings by using the grease
nipples�