Wiring Problems - Arris Touchstone TG4482 User Manual

Light patterns that may appear on the status LED
Status LED
Off
Solid green
Flashing green (1/second)
Solid white
Solid red
Flashing blue
Flashing green (5/second)

Wiring problems

If the Telephony Gateway begins flashing its LED for more than 10 seconds, this indicates a
problem with the telephone wiring — the red and green wires may be shorted (touching),
or there may be undesired voltage on the lines. If this pattern persists for more than 10
seconds, disconnect the telephone lines from the Telephony Gateway, then call a wiring
technician for assistance.
Touchstone TG4482 Telephony Gateway User Guide DRAFT Revision 1.3
Chapter 5: Operate the Telephony Gateway
Behavior
Powered off
Powering on
Booting up
Online and functioning
No Internet connectivity
WPS mode (times out after two minutes)
Factory reset in process
27