Editing I550 Aoi Properties - Lenze i550 Software Manual

Engineering Tools
2 Using the Add-On Instruction and Referencing the i550
2.3

Editing i550 AOI properties

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2.3 Editing i550 AOI properties
The user can also write values to the inputs of the AOI through the Properties window. This method
is best used to write values to parameters that will remain constant throughout the program, for
example the Set Velocity or the Direction if the machine will always be running at the same speed in
the same direction. It can also be used to send initial values to the drive. Please note, any time the
parameters of the AOI are directly assigned in the ladder logic (e.g. rungs 0-5 in Figure above) it
21
will overwrite the settings made in the Properties window.
To open the Properties window for the AOI, follow Figure22 Figure23.
Figure 22: Click to open Properties window
Figure 23: AOI Properties window
18 | P a g e L e n z e i 5 5 0 A c t u a t o r S p e e d A O I