Acer NV5814U Quick Start Manual page 51

U
NINTENTIONAL EMITTER PER
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set
out in the radio interference regulations of Industry Canada.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioélectrique édicté par
Industrie Canada.
T
ELECOMMUNICATIONS PER
The Industry Canada label identifies certified equipment. This certification means that the equipment meets
certain telecommunications network protective, operation, and safety requirements. The Department does not
guarantee the equipment will operate to the users' satisfaction.
Before installing this equipment, users should make sure that it is permissible to be connected to the facilities of
the local telecommunications company. The equipment must also be installed using an acceptable method of
connection. In some cases, the inside wiring associated with a single-line individual service may be extended by
means of a certified connector assembly. The customer should be aware that compliance with the above
conditions may not prevent degradation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by
the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may
give the telecommunications company cause to request the user to disconnect the equipment.
Warning: To avoid electrical shock or equipment malfunction do not attempt to make electrical ground
connections by yourself. Contact the appropriate inspection authority or an electrician, as appropriate.
Users should make sure, for their own protection, that the electrical ground connections of the power utility,
telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution may
be particularly important in rural areas.
The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum
number of terminals allowed to be connected to a telephone interface. The termination on an interface may
consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence
Numbers of all the devices does not exceed 5.
日本 (J )
APAN
本装置は、第二種情報装置（住宅地域またはその隣接した地域において使用されるべき情報装置）デ
住宅地域での電波障害防止を目的とした情報装置等電波障害自主規制協議会（VCCI）基準に適合して
おります。
しかし、本装置をラジオ、テレビジョン受信機に、近接してご使用になると、受信障害の原因となる
ことがあります。本書の説明にしたがって正しい取り扱いをしてください。
Japanese Modem Notice
本製品を日本で使用する場合は必ず日本国モードでご使用ください。他国のモードをご使用になると
電気通信事業法（技術基準）に違反す行為となります。なお、ご購入時は初期値が日本国モードとなっ
ておりますので、そのままご利用ください。
CE C
OMPLIANCE REQUIREMENT
Products with the CE marking comply with both the Electromagnetic Compatibility Directive (2004/
108/EC) and the Low Voltage Directive (2006/95/EC) issued by the Council of the European
Communities.
Compliance with these directives implies conformity to the following European Standards:
EN55022: Radio disturbance characteristics
EN55024: Immunity characteristics
EN61000-3-2: Limitation of harmonic current emissions
EN61000-3-3: Limitation of voltage fluctuation and flicker in low-voltage supply system
EN60950-1: Product Safety. If your computer includes a telecommunication network board, the input/output
socket is classified as Telecommunication Network Voltage (TNV-3).
Note for computers equipped with wireless controllers and wired modems:
Hereby, Gateway, declares that the wireless devices provided with this computer include a low
power radio transmitter in full compliance with the essential requirements and other relevant
provisions of Directive 1999/05/EC for Low Voltage, EMC and RF of the R&TTE.
EN300328 - Electromagnetic compatibility and Radio spectrum Matters (ERM).
EN301489-1/-7/-17/-24 - EMC standard for radio equipment and services, common technical requirements.
ICES-003
I C CS-03 (
NDUSTRY ANADA FOR PRODUCTS FITTED WITH AN
IC- )
COMPLIANT MODEM
Regulatory Information - 51