Removing The Tail Cover; Installing The Ccu (For Yzf-R1M); Connecting To The Ccu (For Yzf-R1M); Installing The Tail Cover - Yamaha YZF-R1 2020 Service Manual

EAS33363

REMOVING THE TAIL COVER

Refer to "GENERAL CHASSIS (1)" on page 4-1.
EAS33371

INSTALLING THE CCU (for YZF-R1M)

TIP
When the passenger seat cover is attached, the
total number of occupants is reduced to one per-
son. Depending on your area's regulations, it
may be necessary to change the vehicle's regis-
tration to reflect this. Contact your local authori-
ties.
EAS31676

CONNECTING TO THE CCU (for YZF-R1M)

The CCU (Communication Control Unit) con-
nects to the vehicle's CAN (Controller Area Net-
work) and has a GPS receiver to enable the
recording of vehicle and riding data. (Refer to
"MENU SCREEN" on page 1-6.) Logging data
and YRC setting data can be accessed when a
smartphone or tablet is connected to the CCU
wireless network.
TIP
From the Google© or Apple© application store,
download the "Y-TRAC" application to make use
of the logging data and the "YRC Setting" appli-
cation to remotely adjust the YRC settings.
1. Connect:
• CCU wireless network
a. Remove the bolts "1" and then remove the
passenger seat cover assembly "2" as
shown.
2
1
b. Note down the CCU serial number "a".
c. Turn the main switch to "ON" and ap-
d. Connect to the wireless network "Yamaha
TIP
Since all CCU-equipped models put out a simi-
larly named wireless network, have only one ve-
hicle turned on at a time to avoid confusion.
e. Install the passenger seat cover assembly
EAS33364

INSTALLING THE TAIL COVER

Refer to "GENERAL CHASSIS (1)" on page 4-1.
1
4-8
GENERAL CHASSIS (2)
a
proach the vehicle with a wireless capable
smartphone or tablet.
Motor Network" by inputting the CCU seri-
al number as the password.
to the original position, and then install the
bolts.
Passenger seat cover bolt (for
YZF-R1M)
7 N·m (0.7 kgf·m, 5.2 lb·ft)