Yamaha YZF-R1 2020 Service Manual page 764

A
1
P/W G/R
P G Y/R Gy/G
L/B P/L G/B Y/G
L/W P/B G/L Y/B
3
*. Joint coupler for YZF-R1
**. Joint coupler for YZF-R1M
Is resistance ∞ Ω?
YES
→ Go to step 3.
NO
a. Replace the wire harness.
b. Turn the main switch to "OFF" and back to "ON", and then check the condition of the DTC using the
malfunction mode of the YDT.
Is it in the "Recovered" condition?
YES
→ Service is completed.
NO
→ Go to step 3.
3. Replace the IMU.
• Replace the IMU, and complete the service.
Refer to "GENERAL CHASSIS (1)" on page 4-1.
Y Br/W
Gy B
Gy/B Gy/R
W W/R W/B W/G
B
1
P/W G/R Y
P G Y/R Gy/G Gy
L/B P/L G/B Y/G Gy/B Gy/R
L/W P/B G/L Y/B W W/R W/B
3
2
*
L/W L/W L/W L/W L/W L/W L/B L/B L/B L/B L/B L/B
**
L/W L/W L/W L/W L/W L/W L/W
L/B L/B L/B L/B L/B L/B L/B
9-269
U0125 (SCU)
Br/W
B
W/G