General Chassis (7) - Yamaha YZF-R1 2020 Service Manual

1
a. Fit the hole "a" in the side cover (right) "1"
onto the projection "b" on the side cover
bracket and slide the side cover (right) up-
ward.
TIP
• Position the front cowling assembly "2" on the
side cover (right) "1".
• Make sure that there is projection "c" on the
side cover (right) "1" in the hole "d" in the front
cowling assembly "2".
b
2
1
b. Install the side cover bolt (right).
Side cover bolt (right)
7 N·m (0.7 kgf·m, 5.2 lb·ft)
1
a
c d
4-27
GENERAL CHASSIS (6)