Yamaha YZF-R1 2020 Service Manual page 61

1. Muffler protector bracket (right)
2. O sensor lead
2
3. Rear wheel sensor lead
4. Rear brake light switch lead
5. EXUP cable
6. Frame
7. Clutch cover
A. Route the O sensor lead over the muffler
2
protector bracket (right).
B. Route the rear wheel sensor lead to the outside of
the EXUP cables and to the inside of the brake
hose.
C. Route the rear brake light switch lead to the
outside of the rear wheel sensor lead.
D. Push in the O sensor lead from the outside until it
2
is aligned with the mating surface of the clutch
cover.
2-22
CABLE ROUTING