Yamaha YZF-R1 2020 Service Manual page 103

1. CCU (Communication Control Unit)
2. GPS unit lead
3. GPS unit coupler
4. Wire harness coupler cap
5. Wire harness coupler (to sub-wire harness)
6. Yamaha diagnostic tool coupler
7. CCU (Communication Control Unit) lead (sub-wire
harness)
8. Passenger seat cover
9. GPS unit
10. Rear cover
A. Fasten the CCU and CCU bracket with the plastic
locking tie.
B. Fasten the CCU and CCU bracket with the band.
C. Connect the CCU coupler (sub-wire harness) to
the CCU.
D. Fasten the sub-wire harness to the rear frame with
the clamp. Align the corrugated end of the sub-wire
harness with end of the clamp.
E. Route the GPS unit lead between the passenger
seat cover and the rear cover.
F. Route the GPS unit lead as shown in the
illustration.
G. Route the GPS unit lead to the inside of the vehicle
through the hole in the passenger seat cover.
H. Fasten the GPS unit lead with the clamp on the
passenger seat cover.
2-64
CABLE ROUTING