Panel Mounting; Dimensions And Cutout - Advantech TPC-51WP Series User Manual

1.7

Panel Mounting

1. There is a rubber waterproof gasket on the AL front bezel. Make sure the water-
proof gasket is in position before installing TPC into the panel opening.
2. Install the TPC into the panel opening.
3. Take the clamps and long screws from the accessory box. Hook the clamps to
the holes around the four sides of the bezel. Insert the screws into every clamp
and fasten them. These screws will push the mounting panel and fix the unit.
4. The suggested mounting panel thickness is less than 6 mm (0.236").
1.8

Dimensions and Cutout

TPC-1051WP Series
 Weight: 2.56 kg
 Dimensions (W x H x D): 283.1 x 202.3 x 61.4 mm ( 11.15" x 7.96" x 2.42)
 Cutout: 274.6 (+/- 0.4mm) x 193.8(+/-0.7mm)
TPC-1551WP Series
 Weight: 5 kg
 Dimensions (W x H x D): 419.7 x 269 x 61.9mm (16.52" x 10.59" x 2.44")
 Cutout: 412.4(+/-0.4mm) x 261.7(+/-0.7mm)
5 TPC-1051WP1551WP Series User Manual