Table of Contents
Advertisement
•
USB Module Version
•
USB Devices
Legacy USB Support
This feature enables support for USB 2.0 and older. The options are Enabled, Disabled,
and Auto.
XHCI Hand-off
When this feature is disabled, the motherboard will not support USB 3.0. The options are
Enabled and Disabled.
Port 60/64 Emulation
This feature allows legacy I/O support for USB devices like mice and keyboards. The options
are Enabled and Disabled.
PCIe PLL SSC
Select Enable for PCH PCI-E Spread Spectrum Clocking support, which will allow the BIOS
to monitor and attempt to reduce the level of Electromagnetic Interference caused by the
components whenever needed. The options are Enable and Disable.
Azalia
Use this feature to enable or disable Azalia audio devices. If Auto is selected, BIOS will
automatically enable Azalia once an Azalia device is detected. The options are Enable,
Disable, and Auto.
Azalia PME Enable
Use this feature to enable or disable PME (Power Management Event) for Azalia. The
options are Enable and Disable.
Server ME Configuration (for X11SPA-TF only)
The following General ME Configuration will display:
•
Oper. Firmware Version
•
Backup Firmware Version
•
Recovery Firmware Version
•
ME Firmware Status #1
•
ME Firmware Status #2
•
Current State
•
Error Code
93
Chapter 6: UEFI BIOS
Advertisement
Table of Contents
