Table of Contents
Advertisement
SuperWorkstation 5049A-T User's Manual
1Gb/10Gb LAN Enable/Disable
JPL1/2 allows you to enable or disable the 1Gb/10Gb LAN. The default setting is Enabled.
USB Wake-Up
This jumper allows you to "wake up" the system by pressing a key on the USB keyboard or
by clicking the USB mouse of your system. The JPUSB1 jumper is used together with the
USB Wake-Up feature in BIOS. Both JPUSB1 and the BIOS setting must be enabled to use
this feature. The default setting is Enabled.
Note: Please be sure to remove all other USB devices from the USB ports whose jumpers
are set to disabled before the system goes into standby mode.
1Gb/10Gb LAN Enable/
Disable
Jumper Settings
Definition
Jumper Setting
Pins 1-2
Enabled
Pins 2-3
Disabled
68
Advertisement
Table of Contents
