Supermicro SuperWorkstation 5049A-T User Manual page 85

CPU T State Control
Software Controlled T-States
Use this feature to enable Software Controlled T-States. The options are Disable and
Enable.
Chipset Configuration

Warning: Setting the wrong values in the following features may cause the system to
malfunction.
North Bridge
This feature allows the user to configure the following North Bridge settings.
UPI Configuration

The following UPI information will display:
•
Number of CPU
•
Number of Active UPI Link
•
Current UPI Link Speed
•
Current UPI Link Frequency
•
UPI Global MMIO Low Base / Limit
•
UPI Global MMIO High Base / Limit
•
UPI Pci-e Configuration Base / Size
Degrade Precedence
Use this feature to set degrade precedence when system settings are in conflict. Select
Topology Precedence to degrade Features. Select Feature Precedence to degrade Topol-
ogy. The options are Topology Precedence and Feature Precedence.
Link L0p Enable
Select Enable for the QPI to enter the L0p state for power saving. The options are Dis-
able, Enable, and Auto.
Link L1 Enable
Select Enable for the QPI to enter the L1 state for power saving. The options are Dis-
able, Enable, and Auto.
85
Chapter 6: UEFI BIOS