Supermicro SuperWorkstation 5049A-T User Manual page 88

SuperServer 5049A-T User's Manual

Memory Topology
This feature displays the information of onboard memory modules as detected by the
BIOS.
Memory RAS Configuration

Static Virtual Lockstep Mode
Select Enable to run the system's memory channels in lockstep mode to minimize
memory access latency. The options are Disable and Enable.
Mirror Mode
This feature allows memory to be mirrored between two channels, providing 100%
redundancy. The options are Disable, Mirror Mode 1LM, and Mirror Mode 2LM.
Memory Rank Sparing
Select Enable to enable memory-sparing support for memory ranks to improve memory
performance. The options are Disable and Enable.
Correctable Error Threshold
Use this feature to specify the threshold value for correctable memory-error logging,
which sets a limit on the maximum number of events that can be logged in the memory
error log at a given time. The default setting is 100.
Intel® Run Sure
Select Enable to support Intel Run Sure Technology to further enhance critical data
protection and to increase system uptime and resiliency. The options are Disable
and Enable.
SDDC Plus One
Single Device Data Correction (SDDC) organizes data in a single bundle (x4/x8 DRAM).
If any or all the bits become corrupted, corrections occur. The x4 condition is corrected
on all cases. The x8 condition is corrected only if the system is in Lockstep Mode. The
options are Disable and Enable.
ADDDC Sparing
Adaptive Double Device Data Correction (ADDDC) Sparing detects when the prede-
termined threshold for correctable errors is reached, copying the contents of the failing
DIMM to spare memory. The failing DIMM or memory rank will then be disabled. The
options are Disable and Enable.
88