Supermicro SuperWorkstation 5049A-T User Manual page 70

SuperWorkstation 5049A-T User's Manual
M.2 LED
M.2 LEDs are located at LE3, LE4, LE5, and LE6 on the motherboard. When a M.2 LED is
blinking, its corresponding M.2 device functions normally. Refer to the table below for more
information.
Onboard Power LED
The Onboard Power LED is located at LEDPWR on the motherboard. When this LED is on,
the system is on. Be sure to turn off the system and unplug the power cord before removing
or installing components. Refer to the table below for more information.
BMC Heartbeat LED
A BMC Heartbeat LED is located at LEDBMC on the motherboard. When LEDBMC is blinking,
the BMC is functioning normally. Refer to the table below for more information.
M.2 LED State
Definition
LED Color
Green: Blinking Device Working
Onboard Power LED Indicator
Definition
LED Color
System Off (power cable
Off
not connected)
Green System On
BMC Heartbeat LED Indicator
Definition
LED Color
Green: Blinking BMC Normal
70