Outputs - DEVA Broadcast DB3011 Maintenance And Operation Instruction Manual

OUTPUTS

The general purpose outputs settings are applied through this page. The Audio output section
allows Audio Vol for the analog output to be set, and the Digital Out to be [Enabled] or [Disabled].
Function, Type and Pulse time for each of the GPOs could be set individually. You can choose
between the following Functions: Alarm GPO, RDS Lock, TA Flag and TP Flag. Type is used
for specifying of the active level or active pulse polarity. When a GPO assigned event is triggered
the output can change the level to Active High/Low or to generate High/Low Pulse for the
specified duration.
PLEASE NOTE
chosen as a preferred alarm, notifications will not be indicated, nevertheless one is being generated.
that if the GPO's function is not assigned as Alarm GPO and the selfsame is
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
- 55 -