COMMUNICATION
WARNING:
The applied changes will take effect upon pressing the [Save] button. All settings
marked with the symbol
NOTE:
If the new value is invalid or out of range, the edited field will become red.
Network
The network addresses could be set manually (static IP)or automatically via a DHCP server.
To set static IP address, Netmask, Gateway and DNS addresses, the DHCP should be [Disabled].
In order for the built-in DHCP client to be activated, the function should be [Enabled]. When the
DHCP client is activated, all assigned values will be shown in the relevant fields on the Network
Status. If due to any reason, the DHCP procedure cannot be completed, DB3011 will use Auto IP
and will generate an IP address.
Network Status
Information on the current status of the network can be found here – MAC, IP Type, IP,
Netmask, Gateway, DNS 1, and DNS 2.
HTTP Server
[Enabled] / [Disabled] the HTTP Server. Specify the Server Port and Session timeout.
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
require reboot, therefore the [Save & Reboot] button should be used.
- 53 -
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
Need help?
Do you have a question about the DB3011 and is the answer not in the manual?