Outdoor Unit - Toshiba RAV-SM304SDT-TR Service Manual

Table of Contents

Advertisement

14-2. Outdoor Unit

14-2-1. RAV-SP404AT-E, RAV-SP404ATZ-E, RAV-SP404ATZG-E
RAV-SP454AT-E, RAV-SP454ATZ-E, RAV-SP454ATZG-E
No.
Part name
Common
1
procedure
Never forget to put on the gloves at working
time, otherwise an injury will be caused by
the parts, etc.
1. Detachment
1) Stop operation of the air conditioner, and
2) Remove the valve cover.
3) Remove wiring cover
4) Remove the upper cabinet.
2. Attachment
1) Attach the waterproof cover.
Be sure to attach a waterproof cover.
If it is not attached, there is a possibility that
water enters inside of the outdoor unit.
2) Attach the upper cabinet.
3) Perform cabling of connecting cables, and
4) Attach the wiring cover.
5) Attach the valve cover.
Procedure
CAUTION
turn off the main switch of the breaker for
air conditioner.
(ST1T Ø4 × 8L, 1 pc.)
• After removing screw, remove the valve
cover pulling it downward.
(ST1T Ø4 × 8L, 2 pcs.), and then remove
connecting cable.
(ST1T Ø4 × 8L, 5 pcs.)
• After taking off screws, remove the
upper cabinet pulling it upward.
CAUTION
(ST1T Ø4 × 8L, 5 pcs.)
• Hook the rear side of the upper cabinet
to claw of the rear cabinet, and then put
it on the front cabinet.
fix with cord clamp.
(ST1T Ø4 × 8L 3 pcs.)
(ST1T Ø4 × 8L, 2 pcs.)
(ST1T Ø4 × 8L, 1 pc.)
• Insert the upper part of the upper
cabinet, set hooking claw of the valve
cover to the slit (at three positions) of
the main body, and then attach it
pushing upward.
– 153 –
Remarks
Valve
cover
Wiring
cover
Upper cabinet
Water-proof
cover
Cord clamp
Rear cabinet
Claw

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents