Detachments; Indoor Unit - Toshiba RAV-SM304SDT-TR Service Manual

Table of Contents

Advertisement

14-1. Indoor Unit

14-1-1. Slim Duct Type
RAV-SM304SDT-E, RAV-SM304SDT-TR, RAV-SM404SDT-E, RAV-SM454SDT-E, RAV-SM564SDT-E
No.
Part name
Be sure to put on gloves at working; otherwise an injury may be caused by parts, etc.
• Before replacement of the parts, be sure to stop operation of the air conditioner and turn off
switch of the breaker.
1. Detachment
Air Filter
1
1) Push knobs (3 positions) of the air filter hooks
2. Attachment
1) Insert the air filter surely into the hooking
NOTE)
In case of sucking system from bottom side,
installation direction is determined. Install the air
filter so that hooks are aligned at discharge side.
1. Detachment
Plate inlet-A
2
Plate inlet-B
1) Take off fixing screws while holding the plate
2) Take off fixing screws while holding the plate
NOTE)
Be careful that sheeting metal does not fall when
removing the plate inlet.
2. Attachment
1) Using the screws taken off in procedure 1. 2) of

14. DETACHMENTS

Procedure
toward the arrow direction to remove the air
filter.
grooves (4 positions) at the opposite side of
the hooks, and then fix it to the original
position.
inlet-A with hands to remove it.
(Sucking system from rear side: Ø4 × 10, 8 pcs)
(Sucking system from bottom side:
Ø4 × 10, 11 pcs)
inlet-B with hands to remove it.
(Ø4 × 10, 6 pcs)
2 , attach the plate inlets in order of B
→ A while holding them not to fall down.
REQUIREMENT
[In case of sucking system from rear side]
[In case of sucking system from bottom side]
[In case of sucking system from rear side]
[In case of sucking system from bottom side]
– 148 –
Remarks
Air filter
Air filter
Air filter
Hook
Hook
Hook
Air filter
Air filter
Air filter
Push
Push
Push
Hook
Hook
Hook
Plate inlet-B: 6 screws
Plate inlet-B: 6 screws
Plate inlet-B: 6 screws
Plate inlet-A: 8 screws
Plate inlet-A: 8 screws
Plate inlet-A: 8 screws
Plate inlet-A: 11 screws
Plate inlet-A: 11 screws
Plate inlet-A: 11 screws
Plate inlet-B: 6 screws
Plate inlet-B: 6 screws
Plate inlet-B: 6 screws
Push
Push
Push

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents