Toshiba RAV-SM304SDT-TR Service Manual page 128

2. How to confirm the central control address
(New function for AMT32E remote controller)
<Procedure> It can be confirmed even during operation or stopping.
1
Push button for 4 seconds or more.
UNIT LOUVER
2
In the frame at left side of the remote controller screen, the lighting set contents are displayed.
During unset time,
3
After lighting display for 3 seconds, the display automatically disappears.
If any button is pushed during display, immediately the display disappears and then the pushed button is
displayed.
3. How to set contents of save operation
In combination with outdoor units before 4 series, the displayed setup value exchanges, but the real operation is
"75% fixed".
1
SAVE
Push for 4 seconds or more during stop of the operation.
• flashes.
2
UNIT LOUVER
Push (At the left side of the button) and select the unit to be set.
• Every pushing the button, the unit No. changes.
The fan of the selected unit rotates and the louver swings.
3
Determine the capacity restricted value when pushing the save button of TIMER SET
• Every pushing the button, the capacity restricted value can be set at 1% interval in the range between
100% and 50%.
∗ The setting at shipment is 75%.
4
SET
Push and then push
0099 0099 0099
0099 0099
(At shipment from factory) is displayed.
UNIT No.
1–1
TEST to finish the setup.
UNIT No. UNIT No.
1–2 1–3
UNIT No. 1–4
Setup value at saving
– 128 –
/ .