Table of Contents
Advertisement
The PIP 1 layer does not occupy the whole screen and is shown in front of the Background
video layer when enabled. In some setups the PIP 1 image can be hidden behind the PIP 2
image. This is not a fault. Change the position or size of the PIP 1 or PIP 2 image if required.
The PIP 2 layer does not occupy the whole screen and is shown in front of the Background
video and PIP 1 layers when enabled. In some setups the PIP 1 image can hide the PIP 2
image. Change the position or size of the PIP 2 or PIP 1 image if required.
The DSK 1 layer can occupy the whole screen. If set up incorrectly this layer can stop the
video layers behind it from being seen properly. Re-adjust your DSK 1 settings or switch off
the DSK1 function on the HS-2850 to restore the video behind it.
The DSK 2 layer can occupy the whole screen. If set up incorrectly this layer can stop the
video layers behind it from being seen properly. Re-adjust your DSK 2 settings or switch off
the DSK2 function on the HS-2850 to restore the video behind it.
The LOGO and Clock layer does not occupy the whole screen and all other layers are visible
through it. A logo if positioned incorrectly can partially hide an important part of the video,
PIP or CG LUMA KEY layers. Typically logos or station ID bugs are placed in a corner of the
screen.
Note: Where possible prepare and position the upper video layer elements in advance of
the live production starting to avoid them appearing on the program output incorrectly.
Most broadcast networks have guidelines and advice on the use of video, images, music,
logos and on screen text so it is best to check beforehand when planning a production. Do
not use copyright protected content until you have the relevant permissions. Information on
royalty free video, images and music is widely available, speak to your local dealer or search
for advice on the internet.
57
Advertisement
Table of Contents
