Table of Contents
Advertisement
T-Bar Re-Calibration ......................................................................................................... 77
Monitor Firmware Update ................................................................................................ 78
SERVICE AND SUPPORT .................................................................................................. 84
Disclaimer of Product & Services
The information offered in this instruction manual is intended as a guide only. At all times,
Datavideo Technologies will try to give correct, complete and suitable information. However,
Datavideo Technologies cannot exclude that some information in this manual, from time to
time, may not be correct or may be incomplete. This manual may contain typing errors,
omissions or incorrect information. Datavideo Technologies always recommend that you
double check the information in this document for accuracy before making any purchase
decision or using the product. Datavideo Technologies is not responsible for any omissions
or errors, or for any subsequent loss or damage caused by using the information contained
within this manual. Further advice on the content of this manual or on the product can be
obtained by contacting your local Datavideo Office or dealer.
................................................................................ 79
........................................................................................... 80
...................................................................................................... 81
4
Advertisement
Table of Contents
