Table of Contents
Advertisement
Once the chosen setting has been confirmed with the ENTER button it is stored within the
switchers non-volatile memory.
Version Number xx.xx where xx.xx is the firmware version number.
1080i50Hz
1080i60Hz
1080i59.94Hz
Note: When Output Standard & Format is set to the option HD SDI 1080p (25/29/30):
1. The Output will be automatically adjusted to 1080p25Hz if 1080i50Hz is selected for Base
Standard.
2. The Output will be automatically adjusted to 1080p29Hz if 1080i59.94Hz is selected for Base
Standard.
3. The Output will be automatically adjusted to 1080p30Hz if 1080i60Hz is selected for Base
Standard.
Audio Dynamic Range
EXTERNAL ANALOG AUDIO
AUDIO PASS THROUGH
Brightness
Contrast
Saturation
Aperture
Y-C Delay
Set to Norminal
Inputs 1,2,3,5,6,7,9,
10&11
Inputs 4,8 &12
Version Number
Base Standard
Tick selection for ON or OFF
Audio Dynamic Range
24
18
Audio Tract
Tick selection for ON or OFF
On Preview Video Adjustment
72 to 184, default 128
36 to 92, default 64
36 to 92, default 64
0 to 3
0 to 7
Reset to default values
Video Input Standard and Format
Can be a choice of:
HD SDI 1080i *
HD SDI 1080p (50/59/60Hz) *
HD SDI 1080p (25/29/30Hz) *
HD SDI 720p (50/59/60Hz) *
SD SDI 4:3
SD SDI 16:9
Can be a choice of
HD SDI 1080i *
HD SDI 1080p (50/59/60Hz) *
HD SDI 1080p (25/29/30Hz) *
HD SDI 720p (50/59/60Hz) *
SD SDI 4:3
SD SDI 16:9
HD HDMI 1080i
HD HDMI 1080p (50/59/60Hz)
HD HDMI 1080p (25/29/30Hz)
HD HDMI 720p(50/59/60Hz)
SD HDMI 4:3
SD HDMI 16:9
22
Select the input that you want
to adjust in the PVW window.
This is a fine adjustment, the
change happens gradually as
the value is increased or
reduced.
Advertisement
Table of Contents
