Table of Contents
Advertisement
Chapter 4
4.1 HDMI Multi-View
HS-2850 Multi-view monitoring is available across one or two HDMI monitors (not supplied).
These HDMI outputs can be used to monitor video and audio in a number of different
configurations. For each setup, embedded audio level indication is also available on all
inputs as well as the Preview and Program windows.
This Multi-view is supplied from the HDMI connection(s) on the rear panel. (See Rear Panel,
item 16.) When connected to two compatible HDMI monitors, a variety of multi-image
layouts is possible.
Configuration A:
- On HDMI screen 1: 9 live inputs
- On HDMI screen 2: 3 live inputs with additional Preview and Program windows
Configuration B:
- On HDMI screen 1: 12 live inputs with additional Preview and Program windows
- On HDMI screen 2: Program window
Configuration C:
- On HDMI screen 1: 8 live inputs with additional Preview and Program windows
- On HDMI screen 2: Program window
Configuration D:
- On HDMI screen 1: 12 live inputs with additional Preview and Program windows
- On HDMI screen 2: Same as HDMI screen 1
Configuration E:
- On HDMI screen 1: 8 live inputs with additional Preview and Program windows
- On HDMI screen 2: Same as HDMI screen 1
HDMI 1
Switcher Video
HDMI 2
Shown left are the five multi-view
configuration options A to E.
How to change the Multi-view output
To change the multi-view option on your
switcher press the ENTER button in the MENU
area of the HS-2850 Control Panel / Keyboard.
This will display an on screen menu on HDMI
output 1. Then use the arrow down button to
highlight the option Multi Screen Mode. Use
the arrow keys to highlight your preferred
option from those shown on the left. Use the
arrow keys to place a tick in the selection box
and then press ENTER to save this choice.
On screen Tally indication
The HS-2850 Multi-Image Preview supplies
55
Advertisement
Table of Contents
